Geely Se-A2 Van 2-Seater LMPA1KMB3PA229070

• February 24

  Title	[Other devices and other] Included in recall
  Sub	Recall completed
  Flag	Recall completed
  Recall Post Date	February 5, 2024
  Target	Vehicles manufactured between (May 1, 2023 - August 30, 2023)
  Defect details	Recall due to confirmation of violation of the tolerance range standard of Article 115 of the Rules on Performance and Standards of Automobiles and Automobile Parts due to an error in the measurement position of the inner dimensions (length, width) of the underbody - The measurement of the underbody length is to be based on the bulkhead at the rearmost seat back height in the passenger compartment (2,710mm), but the bulkhead at the floor level is Violation of the tolerance standard by measuring at the standard (2,800mm) - The width of the bottom is supposed to measure the shortest distance (1,525mm) between the inner side walls, but violation of the tolerance standard by measuring at the longest distance (1,600mm)
  Target device	Other devices Other
  Correction method	Correction of specifications for the target vehicle - Once the correction of the specifications reported after February 5, 2024 is completed, the automobile inspection center will be notified of the changed dimensional specifications, so there will be no problems during regular inspections, and There is no need for the customer to proceed separately
  Correction period	From February 5, 2024
  Contact us	Mobility Networks representative number 1833-2982

• March 24

  Title	[Driving device and other] Included in recall
  Sub	Recall completed
  Flag	Recall completed
  Recall Post Date	March 11, 2024
  Target	Vehicles manufactured between (May 1, 2023 - August 30, 2023)
  Defect details	Fenders must be attached to the back of the wheels of a car (passenger car), but the mudguards are not attached to the rear wheels, so they do not prevent foreign substances such as rainwater, mud, and gravel when driving in rain or on unpaved roads, and are recalled due to the possibility that they may scatter and interfere with the driving of other vehicles (*This may not satisfy the driving device safety standards of Article 12 of the Rules on Performance and Standards for Automobiles and Automobile Parts)
  Target device	Driving device, etc.
  Correction method	Attach mudguards behind the rear wheels (left/right) of the target vehicle
  Correction period	From March 11, 2024
  Contact us	Mobility Networks main number 1833 2982

  Title	[Car body/chassis etc.] Included in recall
  Sub	Recall completed
  Flag	Recall completed
  Recall Post Date	March 11, 2024
  Target	Vehicles manufactured between (May 1, 2023 - August 30, 2023)
  Defect details	When installing a window glass in the goods loading device, a protective rod must be installed to prevent the cargo from falling out. However, because a part (protection plate) different from the standard is installed on the bulkhead window, it does not prevent the cargo from falling out of the loading device, and may cause damage to the bulkhead window. (*This may not satisfy the safety standards for the loading device of Article 32 of the Rules on the Performance and Standards of Automobiles and Automobile Parts.
  Target device	Body/Chassis Other
  Correction method	Replace the bulkhead window “protection plate” with a “protection rod” for the target vehicle
  Correction period	From March 11, 2024
  Contact us	Mobility Networks main number 1833 2982

• July 24

  Title	New car delivery (corporate name)
  Sub	Geumcheon-gu, Seoul No new car shipping price information
  Flag	CORPORATION
  Production country	china
  Date of production	November 21, 2023
  First registration date	July 24, 2024
  New car list price	39.8 million won
  New car delivery price	No information
  First time buyer	corporation
  Address at time of purchase	Geumcheon-gu, Seoul

• November 24

  Title	[Other devices and other] Included in recall
  Sub	Recall completed
  Flag	Recall completed
  Recall Post Date	November 22, 2024
  Target	Vehicles manufactured between (May 1, 2023 - August 30, 2023)
  Defect details	Due to a design error in the high-power battery slow charging device, the externally exposed conductor of the charging connection port may come into contact with the human body. In this case, there is a risk that current may flow through the externally exposed conductor of the high-power battery slow charging device connection due to increased humidity due to climate change, and as the charging port ages and the insulator wears out, it may lead to accidents such as electric shock when in contact with the human body. (Non-compliant with safety standards)
  Target device	Other devices Other
  Correction method	Replace the slow charging device with an improved product for the target vehicle
  Correction period	From November 22, 2024
  Contact us	Mobility Networks representative number 1833-2982

  Title	[Other devices and other] Included in recall
  Sub	Recall completed
  Flag	Recall completed
  Recall Post Date	November 22, 2024
  Target	Vehicles manufactured between (May 1, 2023 - August 30, 2023)
  Defect details	Due to a software design error (nonconformity with safety standards) of the acceleration control device, the return time to the idling state may be delayed even if the accelerator pedal is released while the car is accelerating. In this case, if one of the wires connected to the accelerator pedal and the acceleration control device controller is worn out or disconnected for unexpected reasons while the car is accelerating, or if the return power source malfunctions, the car's acceleration state will remain for several seconds even if the driver takes his foot off the accelerator pedal, which may lead to a safety accident. Recall
  Target device	Other devices Other
  Correction method	Update the acceleration control device controller software for the target vehicle
  Correction period	From November 22, 2024
  Contact us	Mobility Networks representative number 1833-2982

• March 25

  Title	Change registration
  Sub	Change registration Anyang-si, Gyeonggi-do
  Date of change	March 2025
  Address after change	Anyang-si, Gyeonggi-do
  Classification of change	Change registration

• April 25

  Title	[Brake system and other] Included in recall
  Sub	Recall completed
  Flag	Recall completed
  Recall Post Date	April 25, 2025
  Target	Vehicles manufactured between (May 1, 2023 - August 31, 2023)
  Defect details	Due to software design errors in the braking system (nonconformity with safety standards), problems such as brake fluid leakage from the front wheel braking system (braking system 1) may occur. In this case, even if the driver presses the brake pedal while driving, the braking distance is long or the deceleration is not large, which may lead to an unexpected safety accident.
  Target device	Braking device, etc.
  Correction method	Update brake system ESC software for target vehicles
  Correction period	From April 25, 2025
  Contact us	Mobility Networks main number: 1522-7480

• July 25

  Title	No car insurance
  Sub	Non-subscription period: July 2025 ~ August 2025
  Period	July 2025 ~ August 2025 (Total 1 month)

• June 26

  Title	[Lighting device and other] Included in recall
  Sub	Recall required
  Flag	Recall required
  Recall Post Date	June 1, 2026
  Target	Vehicles manufactured between (June 16, 2023 - November 3, 2025)
  Defect details	Due to an error in the manufacturing process of the daytime running light device, the luminance value may fall below safety standards, and in this case, the luminance (brightness) of the daytime running light may decrease during daytime driving, making it difficult for drivers of other vehicles to recognize the recall.
  Target device	Lighting device, etc.
  Correction method	Replace the daytime running light device with a new one for the target vehicle
  Correction period	From June 1, 2026
  Contact us	Mobility Networks main number: 1522-7840

• July 26

  Title	Owner change
  Sub	Trader transaction transfer Mileage 16,944km
  Flag	DEALER
  Date of change	July 15, 2026
  Driving distance when changing	16,944km
  Transaction type	Trader transaction transfer

Стандартные опции: