Geely Se-A2 Van 2-Seater LMPA1KMB4PA218076

• July 2023

  Title	New car delivery (in personal name)
  Sub	Jeonju-si, Jeollabuk-do No new car shipping price information
  Flag	INDIVIDUAL
  Production country	china
  Date of production	May 25, 2023
  First registration date	July 25, 2023
  New car list price	39.8 million won
  New car delivery price	No information
  First time buyer	individual
  Address at time of purchase	Jeonju-si, Jeollabuk-do

  Title	No car insurance
  Sub	Non-enrollment period: July 2023 ~ July 2026
  Period	July 2023 ~ July 2026 (Total 36 months)

• January 2024

  Title	Change registration
  Sub	Change registration (administrative district reorganization) Jeonju-si, Jeonbuk Special Self-Governing Province
  Date of change	January 2024
  Address after change	Jeonju-si, Jeonbuk Special Self-Governing Province
  Classification of change	Change registration (administrative district reorganization)

• February 2024

  Title	[Other devices and other] Included in recall
  Sub	Recall completed
  Flag	Recall completed
  Recall Post Date	February 5, 2024
  Target	Vehicles manufactured between (May 1, 2023 - August 30, 2023)
  Defect details	Recall due to confirmation of violation of the tolerance range standards of specifications under Article 115 of the Regulations on the Performance and Standards of Automobiles and Automobile Parts, caused by errors in the measurement location of the lower body internal dimensions (length, width) - The measurement of the lower body length is supposed to use the bulkhead at the height of the rear seat backrest of the passenger compartment as the reference (2,710 mm), but it was measured using the bulkhead at floor level (2,800 mm), resulting in a violation of the tolerance standards. - The measurement of the lower body width is supposed to be the shortest distance between the inner side walls (1,525 mm), but it was measured as the longest distance (1,600 mm), resulting in a violation of the tolerance standards.
  Target device	Other devices Other
  Correction method	Correction of specifications for the target vehicle   - Once the correction of the specifications reported after February 5, 2024 is completed, the changed dimensional specifications will also be notified to the vehicle inspection office, so there will be no issues during the regular inspection, and the customer does not need to take any separate action
  Correction period	From February 5, 2024
  Contact information	Mobility Networks Main Number 1833-2982

• March 2024

  Title	[Driving device and other] Included in recall
  Sub	Recall completed
  Flag	Recall completed
  Recall Post Date	March 11, 2024
  Target	Vehicles manufactured between (May 1, 2023 - August 30, 2023)
  Defect details	Mudguards should be attached to the rear wheels of a passenger car, but if mudguards are not attached to the rear wheels, there is a possibility that water, mud, gravel, and other foreign substances will not be blocked when driving in the rain or on unpaved roads, and may scatter, potentially hindering the driving of other vehicles. This could result in a recall (*This may not meet the safety standards for running gear under Article 12 of the Regulations on Performance and Standards of Automobiles and Automobile Parts).
  Target device	Driving device, etc.
  Correction method	Attach mud flaps to the rear side (left/right) of the target vehicle's rear wheels
  Correction period	From March 11, 2024
  Contact information	Mobility Networks Main Number 1833 2982

  Title	[Car body/chassis etc.] Included in recall
  Sub	Recall completed
  Flag	Recall completed
  Recall Post Date	March 11, 2024
  Target	Vehicles manufactured between (May 1, 2023 - August 30, 2023)
  Defect details	When installing windows inside a cargo loading device, protective bars must be installed to prevent the cargo from falling. However, if parts (protective plates) that differ from the standard are installed in the bulkhead window and fail to prevent cargo from falling inside the cargo loading device, there is a possibility of damage to the bulkhead window, leading to a recall. (*This may not satisfy the safety standards for cargo loading devices stipulated in Article 32 of the Regulations on Performance and Standards of Automobiles and Automobile Parts).
  Target device	Body/Chassis Other
  Correction method	Replace the bulkhead window 'protective plate' with a 'protective bar' on the target vehicle
  Correction period	From March 11, 2024
  Contact information	Mobility Networks Main Number 1833 2982

• September 2024

  Title	Car inspection completed
  Sub	Regular (progressive) inspection Mileage 10,940km
  Inspection date	September 4, 2024
  Driving distance during inspection	10,940km
  Inspection category	Regular (progressive) inspection
  Inspection station	KS Automobile Engineering Co., Ltd.

• November 2024

  Title	[Other devices and other] Included in recall
  Sub	Recall completed
  Flag	Recall completed
  Recall Post Date	November 22, 2024
  Target	Vehicles manufactured between (May 1, 2023 - August 30, 2023)
  Defect details	Due to a design error in the high-voltage battery slow-charging device, the conductive parts of the charging connector exposed to the outside can come into contact with the human body. In such cases, there is a risk that current may flow through the conductive parts of the high-voltage battery slow-charging device connector exposed to the outside due to increased humidity caused by high temperature and humid climate changes, and if the charging connector deteriorates and the insulator wears out, it can lead to accidents such as electric shock upon contact with the human body, resulting in a recall (non-compliance with safety standards).
  Target device	Other devices Other
  Correction method	Exchange the slow charging device for the target vehicle with an improved product
  Correction period	From November 22, 2024
  Contact information	Mobility Networks Main Number 1833-2982

  Title	[Other devices and other] Included in recall
  Sub	Recall completed
  Flag	Recall completed
  Recall Post Date	November 22, 2024
  Target	Vehicles manufactured between (May 1, 2023 - August 30, 2023)
  Defect details	Due to a software design error in the acceleration control device (non-compliance with safety standards), the time for the vehicle to return to idle may be delayed even when the driver releases the accelerator pedal during acceleration. In such cases, if one of the wires connected to the accelerator pedal and the accelerator control device controller becomes deteriorated or breaks unexpectedly, or if a return power source failure occurs, the vehicle's acceleration may be maintained for several seconds even when the driver releases the accelerator pedal, which may lead to safety accidents, resulting in a recall.
  Target device	Other devices Other
  Correction method	Software update for the acceleration control device controller of the target vehicle
  Correction period	From November 22, 2024
  Contact information	Mobility Networks Main Number 1833-2982

• April 2025

  Title	[Brake system and other] Included in recall
  Sub	Recall completed
  Flag	Recall completed
  Recall Post Date	April 25, 2025
  Target	Vehicles manufactured between May 1, 2023 and August 31, 2023
  Defect details	Due to a software design error in the braking system (non-compliance with safety standards), issues such as brake fluid leakage in the front wheel braking system (braking system 1) may occur. In such cases, even if the driver presses the brake pedal while driving, the braking distance may increase or the deceleration may not be significant, leading to concerns about unexpected safety accidents, resulting in a recall.
  Target device	Braking device, etc.
  Correction method	ESC software update for the braking system of the target vehicle
  Correction period	From April 25, 2025
  Contact information	Mobility Networks Main Phone Number 1522-7480

• June 2026

  Title	[Lighting device and other] Included in recall
  Sub	Recall required
  Flag	Recall required
  Recall Post Date	June 1, 2026
  Target	Vehicles manufactured between (June 16, 2023 - November 3, 2025)
  Defect details	Due to a manufacturing process error in the daytime running light device, the luminous intensity may fall below safety standards, and in such cases, it has been confirmed that there is a possibility that the brightness of the daytime running lights during daytime driving may decrease, making it difficult for drivers of other vehicles to easily recognize them, leading to a recall
  Target device	Lighting device, etc.
  Correction method	Replace the daytime running light device of the target vehicle with a new one
  Correction period	From June 1, 2026
  Contact information	Mobility Networks main number: 1522-7840

• August 2026

  Title	Owner change
  Sub	Trader transaction transfer Mileage 27,910km
  Flag	DEALER
  Date of change	August 12, 2026
  Driving distance when changing	27,910km
  Transaction type	Trader transaction transfer

• September 2026

  Title	Maintenance/repair history
  Sub	Mileage 27,919km
  Date of receipt	September 11, 2026
  Completion date	September 11, 2026
  Maintenance company	KS Automobile Engineering Co., Ltd.
  Maintenance company address	No information
  Mileage	27,919km

Стандартные опции: